converting Hope Pro 2's front hub to Qr15

[Martin]

Lads,

If you want to covert from hope pro 2 standard qr to qr15 all you need is the following?

http://www.chainreactioncycles.com/Models.aspx?ModelID=30152

also, is the conversion is very simple?

thanks

[rob1891]

That is what you need. The conversion is very simple, pull out the QR adaptors (which look very similar to the QR15) and slide in your new ones. You might need something to grip onto the QR adaptor as you are pulling it out. Vise/visegrip with some bits of wood.

20mm is a doddle too. Great hubs!

[Martin]

thanks! all looked a bit easy on the hope website!

[Phil]

Looks nice and easy on the video, I took out 20mm ones, came out real easy, popped in the QR ones not probs, but jaysus such a job trying to extract the QR ones again, lots of cursing and sweating (and not the good kind for cursing and sweating!)

[shane]

you may get one side out easy enough then get a 10mm allen key and hit it from the inside

it will fly across the room